This swing travel motor assembly combines a hydraulic motor configuration with a GFB610 planetary gearbox for hydraulic drive applications in mobile machinery. The gearbox provides speed reduction and torque transmission, while the hydraulic motor supplies the input power required by the equipment.
For OEM integration or replacement projects, verify the gearbox model, reduction ratio, hydraulic motor interface, mounting dimensions and operating requirements before ordering.
The following specifications are based on the supplied GFB610 product data. Final selection should be confirmed against the applicable technical drawing and configuration.
| Parameter | Specification |
|---|---|
| Gearbox Model | GFB610 |
| Rated Output Torque | 85,000 Nm |
| Maximum Output Torque | 127,500 Nm |
| Single-Stage Reduction Ratios | 4.1 / 5.2 / 6.3 |
| Two-Stage Reduction Ratios | 16.3 / 21.2 / 24.9 / 27.3 / 32.8 / 38.9 |
| Three-Stage Reduction Ratios | 67.9 / 88.3 / 113.4 / 136.3 / 158.9 / 187.2 |
| Listed Hydraulic Motor Brands | Danfoss, Eaton, M+S, Rexroth, Linde, SAM, Sauer, SAI, Dinamic Oil and Calzoni |
| Maximum Input Speed | 3,500 r/min |
Note: Listed hydraulic motor brands do not automatically indicate that every motor model is interchangeable. Confirm the specific motor model, connection dimensions, input speed and torque requirements for the intended application.
The images below show product samples supplied for this listing. Confirm the model and mounting interface of the required assembly before purchase.
Swing and travel drive assemblies are selected according to the required output torque, reduction ratio, hydraulic motor configuration and mounting arrangement. Potential applications include:
Excavators and crawler construction machinery.
Drilling rigs and other hydraulic mobile equipment.
Industrial machinery requiring a hydraulic motor and planetary reduction gearbox.
OEM equipment integration and gearbox replacement projects, subject to compatibility verification.
Select the reduction ratio according to the required output speed and torque. The rated and maximum torque values represent different operating limits and should not be treated as interchangeable ratings.
Confirm the hydraulic motor model, mounting flange, shaft or spline connection, displacement and maximum input speed before specifying the drive assembly.
Compare the gearbox dimensions, bolt pattern, output connection and installation space with the equipment drawing. A similar model number alone does not establish direct interchangeability.
Provide information about load characteristics, operating duty, hydraulic supply conditions and working environment so that the required gearbox and motor configuration can be reviewed.
Helps ensure that the reduction ratio matches the required output speed.
Helps verify the hydraulic motor and gearbox interface.
Reduces the risk of dimensional incompatibility during installation.
Supports accurate quotation and technical review for OEM or replacement projects.
The supplied product data lists a rated output torque of 85,000 Nm and a maximum output torque of 127,500 Nm. Confirm the applicable ratings for the selected configuration before final equipment selection.
The supplied data lists single-stage ratios of 4.1, 5.2 and 6.3; two-stage ratios of 16.3, 21.2, 24.9, 27.3, 32.8 and 38.9; and three-stage ratios of 67.9, 88.3, 113.4, 136.3, 158.9 and 187.2.
Several hydraulic motor brands are listed for configuration matching. Availability and compatibility depend on the specific motor model, interface dimensions and operating parameters.
Replacement suitability must be confirmed by comparing the model, reduction ratio, torque requirements, mounting dimensions, output connection and hydraulic motor interface with the existing unit.
Please provide the existing model or nameplate photograph, required reduction ratio, hydraulic motor model, mounting drawing, output torque requirements and intended application.
The original product information states a minimum order quantity of one unit. Please confirm current availability and order terms when requesting a quotation.
Factory visits can be discussed with the sales team in advance. Please confirm the visit date and production schedule before travelling.
